Implant Brands

Which country are Bredent implants from?

A family company based in Senden in southern Germany; the SKY and copaSKY lines, plus a full-mouth concept called 'fast & fixed'

Most people come across the name Bredent on an implant card or a full-mouth quote. The first thing they ask is the country, the second 'is it the same thing as All-on-4?'. Both have a short answer. After that we move on to a more useful question: which SKY line, which diameter and which length should be written on your card, and what the published data actually says.

Short answer

Bredent is a German brand. The company was founded in 1974, its headquarters are in Senden in Bavaria and, by its own account, it is an internationally active family company. Today the group is made up of three divisions, bredent, bredent medical and Dental Concept Systems; the implants come under bredent medical. Its known lines are the SKY family (blueSKY, narrowSKY, copaSKY) and 'SKY fast & fixed', a concept for a fixed full-arch prosthesis on 4 to 6 implants.

Origin: Senden (Bavaria), Germany
Founding and ownership: 1974, family company
Implant lines: blueSKY, narrowSKY, copaSKY
Full-mouth concept: SKY fast & fixed, 4 to 6 implants

Who Bredent are, and where their implants come from

Bredent's roots are not in implants but in the dental laboratory. The company was founded in 1974; according to the company profile, its products were aimed from the outset at dental technicians making prostheses. The group's press release dated July 2026 describes it as an internationally active family company headquartered in the Bavarian town of Senden; according to the same text, the group is represented in more than 100 markets and has more than 600 employees. The group, which celebrated its 50th anniversary in 2024, is now led by CEO Gerald Micko; the same press release describes how the group has changed from a family-run company into an international group of companies.

The group is made up of three divisions: bredent, the brand for prosthetic and laboratory products; Dental Concept Systems (DCS), on the machinery and CAD/CAM side; and bredent medical, the umbrella for implants and surgical products. If your card says 'bredent medical', that means the implant company of the same group; the implant is not a product of a firm outside the group. Their address is the same too: Weißenhorner Straße 2, Senden.

The answer to the question of which country it is from is simpler here than for some other brands. With brands that have changed hands through acquisition, such as Neodent, the origin and the current owner can be in different countries. With Bredent the two coincide: the company is German, a family company, and according to the copaSKY brochure it develops and manufactures its implant solutions itself in southern Germany. Even so, the place of manufacture of the product you have is shown most definitively by the label on the box and its ÜTS record in Turkey.

SKY is not an implant but a family name. blueSKY and SKY classic are the standard lines; narrowSKY is a slimmer option for narrow bone. copaSKY is the newer member of the family. The manufacturer's brochure lists copaSKY in six diameters between 3.0 and 6.0 mm and in lengths of 5.2, 8, 10, 12 and 14 mm; a single connection geometry is used across all diameters. That is why knowing 'I have bredent' is not enough for a repair; the line name, diameter and length should be on the record.

The two claims the brand highlights are short and narrow implants. copaSKY 3.0 is the slim implant the brochure recommends for gaps of 6 mm and narrower; the 'ultra-short' copaSKY, 5.2 mm long, is for back areas where bone height is low. The manufacturer writes that with these implants, procedures such as bone grafting and sinus lifts can be avoided. This is a manufacturer's claim; we look separately below at what the independent literature says about short implants.

'SKY fast & fixed' is bredent's full-arch concept. According to the manufacturer it has been in use since 2007 and aims to fit a fixed prosthesis on 4 to 6 implants on the same day. Its logic is related to All-on-4: the front implants are placed upright and the back ones tilted to bypass the sinus or the nerve in the lower jaw; in this way the existing bone is used without grafting. The difference is at the level of brand and parts: fast & fixed is a protocol built with bredent's own implants and its own top parts (uni.cone).

In this concept the prosthesis fitted on the same day is, in the manufacturer's own words, a temporary restoration. In the conventional method, the patient uses this prosthesis while the implants fuse with the inner, spongy bone; once fusion is complete, the final prosthesis is made. So the phrase 'teeth in a day' does not mean, in this protocol, that the final teeth are fitted that day. When you get a quote, ask in writing which prosthesis will be fitted when, and on which trip treatment will be finished.

Our 72-hour protocol works with a different class of implant: one-piece corticobasal implants that anchor in the hard outer layer of the jaw. With this design, the teeth fitted on day 3 are the final teeth; they are not replaced months later and no second trip is needed. This is not a negative assessment of bredent or fast & fixed; the two methods answer the same question in different ways, and which one suits you becomes clear from a CBCT scan. If you wish, you can send your X-ray or CBCT scan through the assessment form.

When a system like Bredent is a sensible choice, and when it should be questioned

The points below relate less to the brand name than to the designs bredent highlights (short, narrow and tilted implants, a same-day temporary prosthesis).

When it fits

If bone height at the back is low but the width is enoughShort implants were designed for exactly this situation. The ITI consensus report describes implants of 6 mm and shorter as a valid option for avoiding the burden of bone grafting when bone height is reduced.
When the gap between teeth is narrowThere are slim implants for narrow gaps such as the lower front teeth or the lateral incisors in the upper jaw. The ITI report states that survival of narrow implants with a diameter of 2.5 mm and above does not differ from that of standard diameters.
If bone grafting is not wanted for a full archConcepts that bypass the sinus and the nerve with tilted implants aim to build a full-mouth plan without grafts. This is an option worth discussing for people who want to avoid the time and the additional surgery that bone grafting involves.
If both a single tooth and a full mouth are being considered with one systemBecause the same connection is used across all copaSKY diameters, the variety of parts is reduced even if there are implants of different sizes in the mouth. This is a convenience for future repairs.

When it doesn't

If a short implant is presented as the only optionThe same ITI report also states that it saw a wider spread and lower predictability in the survival of short implants. If there is enough bone or another plan is possible, why a short implant was chosen should be discussed.
If there is advanced bone resorption in the upper jawIn a small study in Mainz, the loss rate of tilted back implants in a resorbed upper jaw was found to be high, and the authors noted that this area is still difficult. In this case, the plan should be discussed in detail with a CBCT scan.
If you expect 'final teeth in a day'In the fast & fixed concept, the prosthesis fitted on the same day is temporary. The final prosthesis needs a second stage and often a second trip. If that is not your expectation, the plan should be set up differently from the start.
If you are not told the line name and sizeThis applies not only to bredent but to every brand. The SKY family has several lines and connections; if there is no record, the dentist who works in that mouth later on will have to find the part by guesswork.

Questions to ask at your consultation if Bredent is suggested

Six short questions. Each one has a clear answer; not getting an answer is information in itself.

1
Which SKY line, which diameter and which length?
blueSKY, narrowSKY or copaSKY. The answer should be justified by the width and height of your bone; 'we always use this one' is not enough on its own.
2
If a short implant is to be used, why?
A short implant is often chosen instead of bone grafting. Ask in which area this choice is being made, what the alternative is and what experience the dentist has with this size.
3
Is the prosthesis fitted on the same day temporary or final?
In a fast & fixed plan, the prosthesis fitted on the same day is temporary. Ask in writing when the final prosthesis will be made, what material it will be and how many trips it will take.
4
How many implants, and how many tilted?
The concept is built on 4 to 6 implants. Why a given number was chosen, where the tilted implants will go and how the load distribution was calculated are the most important part of the plan.
5
Will I be given an implant card and the ÜTS record?
Brand, line, diameter, length, serial number and area. Medical devices put on the market in Turkey must be registered in the Product Tracking System; the record can be checked using the label number.
6
How do parts and repairs work?
If a screw comes loose or a top part breaks, how long the part takes to arrive, whether the clinic keeps it in stock, and whether the repair is covered by the treatment.

What the published data does and does not say

There are studies on Bredent implants published in peer-reviewed journals, but most are small and observational. Below are the findings, together with their limits.

Same-day fixed prosthesis on six implants in a resorbed upper jaw

In a retrospective study at the University of Mainz, 10 patients each received six blueSKY implants and had a temporary fixed prosthesis fitted on the same day. Over an average follow-up of 64 months, 3 of the 60 implants were lost; according to the authors the loss rate was comparable with other immediate loading protocols, but the loss among the tilted implants was found to be 'rather high'.

Bone around tilted implants in fast & fixed

An observational study carried out in Bucharest followed 30 tilted implants with panoramic X-rays. Bone loss of up to 7 mm was seen around some implants, and bone gain of up to 8 mm around others. Loss tended to be more marked in the lower jaw, in people who had lost teeth to gum disease and in implants shorter than 16 mm.

Short implants: the general literature

A 2022 meta-analysis that brought together randomised studies found no difference in survival between implants of 6 mm and under and longer implants in sites that did not need bone grafting; at 10 years, technical problems were more common with the short implants. The level of evidence was rated as 'moderate'.

Screw-retained bridges at the back of the mouth

In a retrospective study carried out in Jordan and published in 2026, 50 bridges supported by Straumann and copaSKY implants were followed for up to 5 years. No implants were lost, but 4 of the 50 bridges had to be renewed and mechanical problems were seen in 40 per cent of the bridges; the most common problem was a loose screw. Because the results report the two brands together, they cannot be read as specific to bredent.

The limit these studies share

Patient numbers are small, most are retrospective or observational, and some have no control group. Studies like these show that an outcome is possible, but they do not establish cause and effect between brands. Here too, planning and maintenance stand out as what determines the outcome.

Incomplete statements you often hear about Bredent

Some of the statements that circulate online and in quotes tell only part of the truth.

"It's German-made, so it's trouble-free"

The country of manufacture is part of the quality system, but the known causes of implant loss lie elsewhere: smoking, uncontrolled diabetes, lack of maintenance, load distribution. In a follow-up study published in 2026, in the group in which Straumann and copaSKY implants were examined together, bleeding and bone loss were markedly greater in smokers.

"Fast & fixed is exactly the same as All-on-4"

The logic is similar: a small number of implants, tilted back implants, a fixed prosthesis on the same day. But the parts, connections and protocol belong to bredent; All-on-4 is a method that carries the name of another manufacturer. The parts of one do not fit the other.

"A short implant is always better than a graft"

Short implants remove the burden of a graft, but according to the ITI report, over 1 to 5 years of follow-up their survival ranges from 86.7 to 100 per cent, while for standard implants this range is 95 to 100 per cent. The right choice depends on the state of the bone.

"The opinions in the manufacturer's brochure are independent evidence"

The dentists' opinions in brochures are the experience of practitioners who use that system; they are no substitute for a controlled study. When assessing a system, you need to look at follow-up data published in peer-reviewed journals.

"The implant's brand can be changed later"

As long as the body stays in the bone, only parts from its own system can be fitted on top. In practice, changing brand means removing the implant; that is why it matters that the system used is put on record.

What you should have once treatment is over

These documents are of little use in the first year. Years later, when a screw comes loose or you see a dentist in another city, they may be the only information you have.

Implant card
Brand (bredent medical), line (for example copaSKY or blueSKY), diameter, length, serial number and the area where it was placed. If fast & fixed was carried out, the names of the top parts used as well.
Post-treatment X-ray
It shows where your bone level was on the first day. It is the only document to compare against at later check-ups.
Prosthesis details
Whether the prosthesis fitted is temporary or final, its material, and whether it is screw-retained or cemented. A screw-retained prosthesis can be removed for maintenance; this information saves the next dentist time.
Repair records
Every screw replaced and every top part renewed should go on the record. Built up over the years, this information makes every later procedure easier.

Don't wait if

If the prosthesis moves or a screw seems loose. A loose screw is the most common mechanical problem with bridges of this kind. Carrying on chewing with a loose screw can cause it to break; tightening it early is a much smaller job.
Bleeding or swelling around the implant. Inflammation around an implant often progresses without pain. It can be stopped at an early stage; once it is left too long, the bone that is lost does not come back.
If the temporary prosthesis has cracked or broken. In a fast & fixed plan, the temporary prosthesis holds the implants together throughout the fusion period. A broken part can put uneven load on the implants; let the clinic know without waiting.
If you do not know your implant's line. Call the clinic that did the treatment and ask for your record. If the clinic cannot be reached, it is often possible to identify the system from an X-ray, but it costs time.

How much the brand and the concept affect the price

Bredent's own promotional material presents fast & fixed in terms of a reduced number of implants and avoiding bone grafting. The items that determine the total are:

Number of implants: The difference between 4 and 6 implants has a bigger effect in a full-arch plan than the unit price of the implant. The reason for the number should rest on the bone and the load distribution.
How many stages the prosthesis is made in: In plans where a temporary prosthesis is fitted on the same day and the final one months later, there are two separate prostheses, two separate pieces of laboratory work and often two trips. Check whether the quote includes both.
Whether bone grafting is needed: If a graft can be avoided with short and tilted implants, a separate item for surgery and waiting drops out. If it cannot be avoided, this item also extends the timescale.
Bridgework material: The material of the final prosthesis (zirconia, metal-ceramic or composite-based structures) covers a wider range in the total than the implant brand.
Supply of parts and repairs: With a widely available system, replacing a loose screw is a small job. With a system whose parts cannot be found, the same problem can turn into renewing the prosthesis.

Frequently asked questions

Which country are Bredent implants from?

Germany. The company was founded in 1974 and its headquarters are in Senden in Bavaria. It describes itself as an internationally active family company and writes that it develops and manufactures its implant solutions in southern Germany.

Are Bredent and bredent medical the same company?

Yes, they are parts of the same group. The bredent group is made up of three divisions: bredent (prosthetic and laboratory products), bredent medical (implants and surgery) and Dental Concept Systems (machinery and CAD/CAM). It is normal for your card to say 'bredent medical'.

What is the difference between SKY and copaSKY?

SKY is the family name. blueSKY and SKY classic are the standard lines, and narrowSKY is a slim option. copaSKY is the newer line in the family; the manufacturer's brochure lists six diameters between 3.0 and 6.0 mm and lengths between 5.2 and 14 mm, with a single connection geometry across all diameters. Because top parts are chosen according to the line, the line name on the card matters.

What is SKY fast & fixed, and is it the same as All-on-4?

It is Bredent's full-arch concept: 4 to 6 implants, the front ones upright and the back ones tilted, with a fixed temporary prosthesis on the same day. The logic is similar to All-on-4; but the parts and protocol belong to bredent and are not interchangeable.

Are the teeth fitted on the same day with fast & fixed permanent?

No. The manufacturer describes the work done on the same day as 'implantation and temporary restoration'. In the conventional method, once the implants have fused with the bone, the final prosthesis is made in a separate stage. It is a good idea to see in writing on the quote which prosthesis will be fitted when.

Is the copaSKY ultra-short implant reliable?

Short implants are a valid option in areas where bone height is low; the ITI consensus report assesses them this way too. The same report also states that survival is more variable with short implants. Independent long-term data specific to the 5.2 mm copaSKY is limited; discuss the reasons for the choice with your dentist.

Are Bredent implants any good?

Bredent is a German manufacturer that has been producing for a long time, and there are studies on its systems published in peer-reviewed journals. These studies are small and mostly observational. The outcome is determined more strongly by planning, load distribution, smoking, diabetes control and maintenance than by the brand.

Are Bredent implants used in Turkey?

The manufacturer's SKY brochure includes the opinion of a dentist who uses the system at their clinic in Istanbul; so there are dentists using it in Turkey, but there is no independent data on how widespread it is. The Product Tracking System record of the product to be used can be checked using the label number; this information should be on your implant card.

Will parts for a Bredent implant still be available years from now?

The company has been working in the dental field since 1974, and in copaSKY all diameters share a single connection geometry; this is a convenience that reduces the variety of parts. Even so, ask your clinic whether your line is still being made and who supplies it in Turkey. If your card shows the line, diameter and length, an order can be placed directly.

Sources

Send your X-ray and we will tell you which option is realistic for your tooth.

Get an assessment

Next step

Send your X-ray and we will talk through the options.

Share your CBCT or panoramic X-ray. We will write back within 24 hours on which option is realistic for your tooth.

Get an assessment