Implant Brands

Nucleoss implants: are they Turkish, and how good are they?

Yes, they are made in Turkey, and that on its own is neither a plus nor a minus; what decides it is the documents and continuity

The question of Turkish-made implants is usually answered from one of two extremes: either "it's Turkish-made, so let's support it" or "it should be imported, that's more reliable". Neither tells you anything. On this page we set out what Nucleoss is, where local production really does bring an advantage in practice, and where it changes nothing.

Short answer

Nucleoss is one of the implant brands made in Turkey, with its headquarters in Izmir. Its products belong to the conventional two-piece implant class and, like every medical device put on the market in Turkey, they must be registered in the Product Tracking System (ÜTS). Being Turkish-made is neither a guarantee of quality nor a flaw on its own; what you really need to look at is certification, the continuity of the system and whether its parts can still be obtained years later.

Country of origin: Turkey, based in Izmir
Design type: Conventional two-piece implant
The real advantage of local production: Fast supply of parts from close by
What you really need to ask about: Documents, ÜTS registration and an implant card

Medically reviewed by Bilge Ilgın, Dentist · ImplantologyLast reviewed 2026-09-10

What a Turkish-made implant means, and what it does not

Nucleoss is one of the implant brands designed and manufactured in Turkey; its headquarters are in Izmir. Its range is made up of conventional two-piece implants: a body that goes into the bone and a top part screwed onto it. In other words, in design terms it is in the same class as the most widely used design in the world.

The word 'Turkish-made' says nothing directly about quality, either positive or negative. How reliable an implant is can be read not from the country where it was made but from which standards it was made to, which documents it holds and how much follow-up data stands behind it. Medical devices put on the market in Turkey must be registered in the Product Tracking System (ÜTS), and this record can be looked up using the number on the label of the product that will be used. That is a far more concrete check than any debate about brands.

Local production has a real, concrete advantage: parts are supplied from close by. When a screw comes loose, a top part needs changing, or the right component is needed while a prosthesis is being renewed, having the manufacturer in the same country shortens the wait. This advantage looks small, but in the long run it is one of the most useful things, because it is not the implant itself that wears but the parts on top of it.

The same advantage has a mirror-image limit. If you live outside Turkey, or may move away in future, relying on a system that is widespread only in Turkey can make it harder to find parts if a problem comes up there. This is not a criticism of the brand's quality; it is a planning question about geography. When a system is being chosen for a patient who lives outside Turkey, this question must be discussed.

The second limit is the build-up of data. Systems that have been on the market for decades have long-term, independent publications behind them; what happens fifteen years on has been tracked. With younger systems, this body of evidence is naturally thinner. That does not make them bad; it means the unknowns have not yet been narrowed down. Whichever system is recommended, you have every right to ask how many years of data stand behind it.

On price, local production usually offers a more affordable range, and that is a real advantage. But this is not the right place to save: in the total for a full-mouth plan, the price per implant is usually not the deciding item. The bridgework, the clinical work and any preparatory procedures take up larger shares. Starting the choice of system from price means optimising the smallest item while never discussing the largest.

When a Turkish-made system is the right choice

The criteria below apply whatever the brand; each one can be asked about at your consultation, and the answers can be checked.

The tooth can be saved

If you live in TurkeyIf your follow-up and any repairs will be done here, having the manufacturer in the same country speeds up the supply of parts. It is a convenience that pays off again and again over the years.
If its documents can be verifiedIf the CE mark, ÜTS registration and manufacturer details can be checked, the brand's country of origin becomes secondary. Being verifiable is a stronger assurance than the name of a country.
If the clinic has used the same system for a long timeA team that has used a system for years is familiar with its instruments and how it behaves. That experience is one of the things that makes more difference than the brand.
If a commitment is made on the continued supply of partsIf you are told clearly that production is continuing and that spare parts will be available years from now, you are on solid ground, whatever the system is called.

Saving it is unlikely to hold

If you live outside TurkeyIf your follow-up will be done in another country, a system that is hard to find there may cause problems later on. In that case, a system that is widespread across a wider area should be discussed.
If there is advanced bone resorptionThis is not a brand problem but a design problem. Conventional two-piece implants need volume to anchor in; if there is no volume, a graft or a different class of implant comes into consideration.
If the choice rests on price alonePrice is a legitimate criterion, but when it is the only one, whether the system suits your mouth has never been discussed. Suitability is read from a CBCT scan, not from a price list.
If no record or documents are givenIf you are not told in writing which implant was used, the debate about brands loses its point. This applies to every system, whether Turkish-made or imported.

Questions to ask when a Turkish-made system is recommended

Five questions, all of them short. How clear the answers are tells you as much as the answers themselves.

1
Can I see the product's ÜTS record?
Whether a record exists can be looked up using the product's unique number on the label. That is a more concrete verification than anything you might hear said about the brand.
2
How long has this system been in use?
Both on the market in general and at this clinic. The second often tells you more: a team that has used the same system for years knows that system.
3
How long does it take to get spare parts?
Screws, top parts and impression components. This is where the most concrete advantage of local production shows; the answer should be something that can be given in days.
4
What happens if I move out of Turkey?
If that is a possibility in your plans, say so from the start. The choice of system may change because of it, and it is a decision that is hard to make up for later.
5
Will I be given an implant card?
Brand, diameter, length, serial number and position. Without this document it is harder for another dentist to take over the work; if you move, it will be the only information you have.

Four criteria to look at instead of the brand

If these four are met, the brand name largely stops mattering; if they are not, even the best-known brand will not save you.

Verifiable documents

The CE mark, ÜTS registration and manufacturer details. These can be asked about, shown and checked; they are far more solid than a brand reputation based on hearsay.

Continuity of the system

Is it still in production, and will parts be obtainable ten years from now? With a system that has been withdrawn from the market, a single loose screw can turn into renewing all the bridgework.

The clinic's experience with the system

A team that has used the same system for years knows both its complications and how to repair them. That experience makes more difference than most differences between brands.

Being given the record

The brand, diameter, length, serial number and position should be in your hands in writing. Whatever the system is called, this document is the most valuable thing you have.

Statements that frame the Turkish-made implant debate the wrong way

The debate on this subject often splits into two extremes, and neither of them helps the patient.

"It's cheaper because it's Turkish-made, so it must be lower quality"

The source of a price difference is often not quality but shipping, customs, the importer's margin and the exchange rate. Between two products made to the same standards, a price difference can come from these items.

"If it's imported, it's European, and if it's European, it's good"

An 'imported' label does not indicate any standard. What matters is which standards it was made to and whether its documents can be verified; these are read not from the name of a country but from the product's own records.

"If a Turkish brand is withdrawn from the market, I'll be left stranded"

This risk is real, but it is not specific to Turkish brands; it applies to every brand. The right question is not 'Turkish-made or imported?' but 'is this system still in production, and will its parts be obtainable ten years from now?'

"If the brand is good, the implant will take"

Among the known causes of implant loss, smoking, uncontrolled diabetes, poor maintenance and errors in load distribution come first. The brand is not an item that stands out on this list.

What to keep after treatment

Whether it is Turkish-made or imported makes no difference; the points below are the same for every system.

Get your implant card
The brand, diameter, length, serial number and the area where it was placed. Most clinics give it to you as a ready-made card; if yours does not, asking for it is a normal request.
Make a note of the ÜTS record
The product's unique number is on the card. In future, this number shows beyond doubt which manufacturer the product belongs to.
Keep the post-treatment X-ray
It is the only document that shows where your bone level was on the day of the procedure. If bone loss is being discussed years later, this is the point of comparison.
Keep a digital copy
Keep a copy on your phone and one in your email. When you move to another city or country, this will be the only thing you carry with you.

Message us right away if

A screw comes loose. Carrying on chewing with a loose screw leads to the screw breaking. Removing a broken screw is a much bigger job than tightening it.
Your gums bleed or there is swelling. Inflammation around an implant can be stopped at an early stage. Once it is left too long, the bone that has been lost does not come back.
Before you move out of Turkey. Before you go, get your full record and all your X-rays. If parts are needed where you are going, having the system details to hand shortens the process by weeks.
You are moving to another dentist. Give your new dentist the system details and your old X-rays. A dentist who does not know your starting level will be slow to notice progressive bone loss.

How local production is reflected in the price

Turkish-made systems are usually in a more affordable range, but this difference makes up a smaller share of the total than people think. The costs break down as follows:

Price per implant: With local production, shipping, customs and the importer's margin drop out. The difference is real, but in a plan with several units this is usually not the item that determines the total.
Bridgework and clinical work: The prosthesis material and the laboratory work take up a larger share than the implant itself in most plans. This is also where you should not cut back.
Preparatory procedures: If a graft, a sinus procedure or extractions are needed, these are separate items. They come up often in conventional two-piece plans, and they also add to the timescale.
Future repairs: With a system whose parts are easy to find, a repair stays a small job. A part that cannot be found turns the same job into renewing the bridgework.

Frequently asked questions

Is Nucleoss a Turkish brand?

Yes. It is one of the implant brands made in Turkey, with its headquarters in Izmir. Its products belong to the conventional two-piece implant class.

Do Turkish-made implants have a shorter life than imported ones?

No such generalisation can be made. When the things that determine an implant's lifespan are listed, country of origin is not an item that stands out; planning, load distribution, smoking, uncontrolled diabetes and maintenance head the list. What you should look at is not the country but certification and the continuity of the system.

How do I check the documents for a Nucleoss implant?

Medical devices put on the market in Turkey must be registered in the Product Tracking System (ÜTS). You can look up this record using the unique number on the label of the product that will be used. You can also ask your clinic for the CE mark and the manufacturer details.

I live outside Turkey. Is a Turkish brand suitable for me?

You need to say so from the start. If your follow-up and any repairs will be done in another country, it makes sense to choose a system that can also be found there. This is not a reservation about the brand's quality; it is a planning decision about geography.

Which system do you use?

Our 72-hour protocol relies on a different class of implant: one-piece implants that anchor in the hard outer layer of the bone. It is not a replacement for conventional systems but an answer to a different problem. The details and record of the system we use are given to you in writing at the end of treatment.

I have Nucleoss implants. Can parts from another brand be fitted on top?

Usually not. Each system has its own connection geometry. That is why it matters that the implant used is on record; without a record, a matching part has to be found by trial and error, and that costs time.

Sources

Send your X-ray and we will tell you which option is realistic for your tooth.

Get an assessment

Next step

Send your X-ray and we will talk through the options.

Share your CBCT or panoramic X-ray. We will write back within 24 hours on which option is realistic for your tooth.

Get an assessment